ArcelorMittal Europe sets target to cut carbon emissions by 30% by 2030

Dec 15 2019


The target is in line with an ambition announced in May this year to be carbon neutral in Europe by 2050 to contribute to the European Commission’s Green Deal.

The roadmap to achieve the 30% target is based on three distinct pathways that have the potential to deliver a significant reduction in carbon emissions, including:

  • Clean power steelmaking, using clean power as the energy source for hydrogen-based steelmaking, and longer term for direct electrolysis steelmaking;
  • Circular carbon steelmaking, which uses circular carbon energy sources, such as waste biomass, to displace fossil fuels in steelmaking, thereby enabling low-emissions steelmaking;
  • Fossil fuel carbon capture and storage, where the current method of steel production is maintained but the carbon is then captured and stored or re-used rather than emitted into the atmosphere.

Key to the success of the roadmap, and ArcelorMittal Europe’s ambition to be carbon neutral by 2050, will be supportive policy to ensure a global level playing field and so ArcelorMittal supports the European Commission’s Green Deal, and believes the right market mechanisms are a critical part of enabling the deployment of low-emissions steelmaking. This includes a carbon border adjustment complementary to the existing ETS and the Just Transition Fund, to invest in research, innovation and green technology.

Initiatives and technologies underway or to be implemented at ArcelorMittal Europe – Flat Products’ different sites include:

  • Carbalyst – capture waste gases from the blast furnace and biologically convert it into bio-ethanol. The €120m launch project at ArcelorMittal Ghent is expected to be completed in 2020.
  • IGAR – captures waste CO2 from the blast furnace and converts it into a synthetic gas that can be reinjected into the blast furnace in place of fossil fuels to reduce iron ore. An industrial pilot of this technology is being developed at ArcelorMittal Dunkirk in France.
  • Torero – €40m investment to convert waste wood into bio-coal to displace the fossil fuel coal currently injected into the blast furnace. Our first large scale demonstration plant in ArcelorMittal Ghent is expected to be in operation by the end of 2020.
  • Reducing iron ore with hydrogen – €65m investment at Hamburg site to increase the use of hydrogen for the direct reduction of iron ore.
  • Carbon capture and storage – integrating breakthrough technologies to bring down the costs of capturing, purifying and liquifying CO2 from waste gases. Construction of a carbon capture and storage pilot project, 3D, will begin at ArcelorMittal Dunkirk in 2020 and will be able to capture 0.5 metric tons of CO2 an hour from steelmaking gases by 2021.

Geert Van Poelvoorde, CEO ArcelorMittal Europe – Flat Products, says: “We are committed to the decarbonization of the steel industry, in line with the objectives of the Paris Agreement and the European Union’s commitment to net-zero by 2050 as announced in the Green Deal this week. Our roadmap and the emissions reduction target of 30% by 2030 for Europe is a big step in the right direction. It’s not a one-size-fits-all model, as different parts of our business are at varying starting points. For some sites, certain technologies will work while others will be suited to another route. We’ve spent the last few years testing a range of technologies and now is the time to scale up and put them into action, with the support of the EU and member states, to ensure we are able to fully decarbonise.”

 

ArcelorMittal


Previous: UW Energy Resources Council seeks proposals for coal CCS pilot

Next: Research shows ramping up carbon capture could be key to mitigating climate change

Issue 72 - Nov - Dec 2019

CCUS in Asia - Decarbonisation of Indian industry: Transitioning to a sustainable, low-carbon economy .. Dalmia Cement and Carbon Clean Solutions build carbon capture plant Siemens and Evonik convert CO2 to fuel using bacteria .. Putting CO2 to Use.....


Subscribers can access the latest issue here